Collinite Pre-wax Auto Polish 390
Original price was: ₹ 1,480.₹ 1,331Current price is: ₹ 1,331.
Safely remove defects and achieve a high gloss finish that’s ready for Collinite’s signature wax protection on your car.
In stock
All new clear-coat safe, micro abrasive polish eliminates minor paint defects like fine scratches/ swirls, water spots, mild oxidation, and wash marks from surface; finishing down to impart a smooth, high gloss shine; while facilitating the easy application-and improving the bond-of any of Collinite’s last step durable wax coatings; 845, 476 or 915. Not for use on rubber or black trim. Handcrafted and poured in the USA.
- Eliminates minor paint defects; fine scratches/swirls, water spots, mild oxidation & wash marks
- Imparts a smooth, high gloss shine
- Facilitates the easy application-and improves the bond-of any of Collinite’s durable wax coatings
- Clear coat safe, machine-friendly
Use GreenZ Hybrid Orange pad with DA or rotary machine, use with GreenZ Orange Applicator. Wipe off the polish with a damp GreenZ Edgeless Microfiber Polishing Towel. Work in 2 x 2 sq. ft. sections until the entire vehicle is done.
TIPS
+ Shake well before use each use
+ Always do a test section before using for first time
+ Work on a 2X2 ft. area at a time
MADE IN USA
HOW TO USE
Application by hand:
Mist the GreenZ Polish N Wax Tri-Foam Applicator with XMT Pad Conditioner to moisten the foam.
Apply a button size amount of GreenZ Ultra Finish Polish 4500 to the applicator.
Work in a back and forth, overlapping motion until the area starts to dry. Wipe off the polish with a damp GreenZ All-Purpose Microfiber Towel. Work in 2 x 2 sq. ft. sections until the entire vehicle is done.
Note: Applying GreenZ Ultra Finish Polish 4500 by hand will enhance the gloss but it will not remove swirls. For paint correction, you must apply this product with a polisher or use any more aggressive polish or compound.
Application by Machine:
Make sure the surface to be polished is clean and dry. Fresh paint should be fully cured. Apply GreenZ Ultra Finish Polish 4500 out of direct sunlight.
Use a soft foam finishing pad, like GreenZ Hybrid Black Finishing Foam Pad. Apply a 6 inch line of compound to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.
Polish at 1200-1800 RPM (5-6 OPM on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the defects have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with water and continue buffing.
Wipe the area with a damp microfiber cloth like GreenZ All-Purpose Microfiber Towel.
Always apply a suitable paint protection product such as ceramic coatings, wax or sealant after polishing.
TIPS
+ Shake well before use each use
+ Always do a test section before using for first time
+ Work on a 2X2 ft. area at a time
Only logged in customers who have purchased this product may write a review.
Shipping
- Shipped within 2-3 working days
- Please check our Shipping Policy
Reviews
There are no reviews yet.